Turning a Corner — Asterix week four
Turning a corner.
Week four on Asterix.
Headlinings back up, a transformed heads and the enormous relief of a gearbox back in service.
It has been a beautiful week in Oxnard, with hot days, a couple of swims and some very welcome progress aboard Asterix. The aft cabin headlinings are back up, the heads have had a transformation, and the gearbox is in and working. For the first time in a while, it feels as though we have turned a corner.
Headlinings that stay up.
This is my second attempt at the headlinings. The first coverings went up on Trip Two, only to be found mostly fallen off when I returned on Trip Three. Amanda and I have since researched the materials and tested a new approach: proper marine headlining vinyl and waterproof PVA adhesive.
On Monday, the dock became our workshop. We cleaned the reusable boards, spread the glue carefully and applied the vinyl without lumps or trapped air. Amanda did a brilliant job with the covering, and the panels dried in the sunshine.
Tuesday brought the awkward pieces around the mizzen deck collar. By Wednesday, with rain forecast overnight, the aft cabin panels and lights were back in place and looking terrific.
Then we tackled the heads. I cut out the damaged panels without removing the hatch frame and made the replacements in three pieces. With Amanda covering them and me filling redundant holes, the space soon began to come together. New LED lighting, a removable dressing board over the sinks and a final piece of trim have made it much more useful.
A very welcome sound.
Brad returned with the gearbox on Thursday afternoon, and together we fitted it and connected the shaft. The cockpit lever now selects forward when raised and reverse when moved back, rather than the reversed arrangement after the previous refurbishment.
The big moment came when we ran it in gear at 1,500 rpm. There was no shaft binding. I left it running for quite a while, and it sounded sweet — just as I remembered from inspecting the boat.
We cannot be certain what cured the problem. Brad had worked inside the gearbox, and the diver had replaced the shaft zinc while it was away. Whatever the explanation, the dockside test brought an enormous sense of relief. We can now plan to take Asterix to the yard under her own power later in the month, with the underway test still ahead.
Life between the jobs.
Monday and Tuesday were around 28°C, so we stopped work in time to walk to the beach by the harbour entrance. The water was a little parky, but we both got in. On Tuesday, a beautiful heron stood beside the fishermen, apparently waiting for them to do the catching.
Back aboard, Amanda kept us very well fed: pork and ratatouille, chicken Caesar salad and a lovely Saturday breakfast of bacon and eggs. The cheerful new coloured knives have added a little more joy to the galley. Newscast in the evenings keeps us connected with home.
There has been family news, too. Louis has joined his INEOS ship and managed to get in touch from the North Atlantic. Mum is enjoying her Norway cruise aboard Queen Anne, where Jean-Jaques is working on the bridge. Rather wonderful to have Grandmare aboard as a guest.
Small jobs, and a better bunk.
The cockpit GPS socket is now complete, with its new cable routed before the headlinings closed everything in. I also dismantled the tide clock and ordered a replacement movement.
Saturday was mattress day. Our new three-inch foam trial bottomed out, so we took two inches off the old five-inch Dunlop latex mattress instead. We attacked it with the knives — not a pretty process — but the retained three inches, with a topper, has proved comfortable and gives me more room for my feet. By Sunday, the layers were back in a cover.
These smaller jobs make a real difference to living aboard. They now have a home in Odd Jobs, alongside the deck filling and the other little improvements.
Getting ready for the next stage.
The fridge and freezer have kept me busy in the background, recording temperatures and looking for better efficiency. Brian’s work is finished and the bill agreed. We have a working system; next I want to see what a more suitable holding-plate solution can achieve. The concentrate is ordered, but that experiment is still ahead.
The sails are nearly ready too. I have worked through the loft’s videos, dimensions, fittings and revised bags, and sent back the remaining comments. Hopefully next week will bring the final checks and shipping arrangements.
Sunday was quieter, with a few finishing jobs and plywood bought for the main saloon headlinings. We have a method that seems to work and the materials ready. The engine and gearbox work, the aft cabin is back together, the heads look great and the bunk is comfortable. Jobs are getting finished and staying finished. It has been a good week on Asterix.