SAILAsterix
A FREEDOM 40 · A NEW CHAPTER

Odd Jobs

Oxnard · 9–15 November 2026

Odd jobs.
The little things add up.

Small repairs, useful improvements and the finishing touches of life aboard.

Words: Jason
Trip 04 · Week four
Updated 15 November 2026
13 November 2026The new removable dressing board over the heads sinks

A growing record of the smaller jobs that make Asterix more comfortable and practical. Each entry records what we did, when we did it and what remains to finish.

Complete

Cockpit power for the GPS

9–15 November 2026. I removed the old autopilot cable and ran a new 12V supply from the starboard lighting loom, routing and clipping it beneath the deck to the sloping wooden box in the cockpit. The new socket is now fitted and the installation is complete. It gives us a power supply at the planned position for the Garmin GPSMAP 265.

9 November 2026The old fitting and cable at the cockpit mounting box during removal
9 November 2026Cockpit power wiring during installation, before the headlinings went back
The completed 12V power socket fitted in the cockpit deck box
Prepared · sealing outstanding

Bowsprit joints and anchor swivel

9 November 2026. I raked the old filling and sealant out of the bowsprit joints and fitted a new swivel to the anchor. The joints are prepared for resealing; applying the new sealant remains outstanding.

Complete

Filling redundant deck holes

12 November 2026. With the heads headlining down, I mixed epoxy and filled redundant screw and through-bolt holes. It was a useful opportunity to finish these small repairs before the new panels went back in.

12 November 2026Epoxy and tools laid out for filling redundant holes
12 November 2026Redundant deck holes marked and prepared for filling
Awaiting replacement movement

A new movement for the tide clock

13 November 2026. I dismantled the non-working tide clock and ordered a replacement movement. The repair will continue when the part arrives.

13 November 2026The clock dismantled, exposing the old movement

See the tide-clock repair →

Complete · trial arrangement

A little more room in the bunk

14–15 November 2026. The new three-inch foam trial bottomed out, so we cut the original five-inch latex mattress down to three inches and refitted it with a topper. The layers are now in a cover, the bunk is comfortable and I have more footroom.

14 November 2026The old latex mattress during the two-inch trimming exercise

See the mattress trial →

Fitting outstanding

Hooks, screws and the bunk curtain

15 November 2026. We bought small screws, stainless hooks and bungee cord for the bunk curtain and the remaining finishing jobs. These purchases are preparation; the fitting work is still to be recorded.

Related project: Headlinings and heads →